Publications

Google Scholar
ORCID

  1. R. Stephenson*, B. N. Smith*, A. Wilcox, K. Malhotra, D. Nguyen, J. Alatis, J. Yang, J. L. Doherty, E. Li, N. Alatis, J. Naguin, S. Ding, N. Falcone, L. Liu, F. Mastrocinque, A. D. Franklin, and M. J. Therien, “Aqueous Polymer-Wrapped Single-Walled Carbon Nanotube Inks for Mixed and Single Electronic Structure Thin-Film Transistors” (in preparation).

  2. R. Stephenson, O. Marelly, H. Friman, S. A. Vigil, D. D. Nguyen, J. A. Alatis, B. N. Smith, D. Singh, M. Ozeri, F. Mastrocinque, R. Rao, L. Parks, I. A. Moreno-Hernandez, A. D. Franklin, S. Yochelis, Y. Paltieli, M. J. Therien, “Self-Assembled Chiral Twisted Multilayer Graphene Inks Enable Writable Long-Range Ambient Spin Transport,” (in review at PNAS, Submitted Aug. 2026). 

  3. A. Livieri, J. L. Doherty, B. N. Smith, G. M. U. Bayram, A. D. Franklin, M. R. Wiesner, L. Pizzol, and D. Hristozov, “Cradle-to-gate life cycle assessment of nano-enabled all-carbon recyclable electronic (ACRE) materials,” RSC Sustainability, 2026, https://doi.org/10.1039/d5su00815h

  4. S. Holmes, B. Zhang, V. Ravel, J. L. Doherty, B. N. Smith, and A. D. Franklin, “ Influence of Ar ion beam on WSe2 and resulting contact interfaces in 2D field-effect transistors,” Journal of Vacuum Science & Technology B, 2026, https://doi.org/10.1116/6.0005387

  5. K. Malhotra, B. N. Smith, S. Holmes, J. L. Doherty, A. D. Franklin, “Width-Spreading Effect in Printed Carbon Nanotube Thin-Film Transistors and Its Impact on Device Performance,” ACS Applied Nano Materials, 2026, https://doi.org/10.1021/acsanm.6c00640

  6. B. N. Smith*, F. M. Albarghouthi*, J. L. Doherty, X. Pei, Q. Macfarlane, M. Salfity, D. Badia, M. Pascual, P. Boncenne, N. Bigan, A. M’Barki, and A. D. Franklin, “Capillary Flow Printing of Submicrometre Carbon Nanotube Transistors,” Nature Electronics, vol. 8, pp 1027-1037, 2025. https://doi.org/10.1038/s41928-025-01470-7

  7. J. L. Doherty, Y. Zhang, B. N. Smith, H. A. Hobbie, I. Kymissis, and A. D. Franklin, “Liquid Crystal Displays with Printed Carbon-based Recyclable Transistor Backplanes,” (in press, IEEE EDL).

  8. H. A. Hobbie, J. L. Doherty, B. N. Smith, P. Maccarini, and A. D. Franklin “Conformal printed electronics on flexible substrates and inflatable catheters using lathe-based aerosol jet printing,” npj Flexible Electronics, vol. 8, pp. 54, 2024. https://doi.org/10.1038/s41528-024-00340-0

  9. F. M. Albarghouthi, B. N. Smith, and A. D. Franklin, “Printable FET Biosensors based on Carbon Nanotubes” in “Roadmap on printable Electronic Materials for Sensing,” IOP Nano Futures, vol. 8, pp. 032001. https://doi.org/10.1088/2399-1984/ad36ff

  10. F. M. Albarghouthi, D. Semeniak, I. Khanani, J. L. Doherty, B. N. Smith, M. Salfity, Q. Macfarlane, A. Karappur, S. G. Noyce, N. X. Williams, D. Y. Joh, J. B. Andrews, A. Chilkoti, and A. D. Franklin, “Addressing Signal Drift and Screening for Detection of Biomarkers with Carbon Nanotube Transistors,” ACS Nano, (in press). https://doi.org/10.1021/acsnano.3c11679

  11. B. N. Smith, P. Ballentine, J. L. Doherty, R. Wence, H. A. Hobbie, N. X. Williams, and A. D. Franklin, “Aerosol Jet Printing Conductive 3D Microstructures from Graphene without Post-Processing,” Small, (in press). https://doi.org/10.1002/smll.202305170

  12. J. Rich, B. Cole, T. Li, B. Lu, H. Fu, B. N. Smith, J. Xia, S. Yang, R. Zhong, J. L. Doherty, K. Kaneko, H. Suzuki, Z. Tian, A. D. Franklin, and T. J. Huang, “Aerosol Jet Printing Surface Acoustic Wave Microfluidic Devices,” Microsystems and Nanoengineering, vol. 10, pp. 2, 2024. https://doi.org/10.1038/s41378-023-00606-z

  13. B. Huegen, J. L. Doherty, B. N. Smith, and A. D. Franklin, “Role of Electrode Configuration and Morphology in Printed Prothrombin Time Sensors,” Sensors and Actuators B: Chemical, vol. 399, pp. 134785, 2024. https://doi.org/10.1016/j.snb.2023.134785

  14. E. G. Franklin, B. N. Smith, and A. D. Franklin, “Impact of NaCl concentration in crystalline nanocellulose for printed ionic dielectrics,” J. Emerging Investigators, vol. 6, pp. 1-5, 2023. https://doi.org/10.59720/22-240

  15. S. Lu, B. N. Smith, H. Meikle, M. J. Therien, and A. D. Franklin, “All-Carbon Thin-Film Transistors Using Water-Only Printing,” Nano Letters, vol. 23, pp. 2100-2106, Feb. 2023. https://doi.org/10.1021/acs.nanolett.2c04196

  16. R. McNaboe, L. Beardslee, Y. Kong, B. N. Smith, I. Chen, H. F. Posada-Quintero, and K. H. Chon, “Design and Validations of a Multimodal Wearable Device for Simultaneous Collection of Electrocardiogram, Electromyogram, and Electrodermal Activity,” Sensors, vol 22, pp. 8851, Nov. 2022. https://doi.org/10.3390/s22228851

  17. B. N. Smith, H. Meikle, J. L. Doherty, S. Lu, G. Tutoni, M. L. Becker, M. J. Therien, and A. D. Franklin, "Ionic dielectrics for fully printed carbon nanotube transistors: Impact of composition and induced stresses," Nanoscale, vol. 14, pp. 16845-16856, Nov. 2022. https://doi.org/10.1039/D2NR04206A

  18. A.B.M.H. Talukder, B. Smith, M. Akbulut, F. Dirisaglik, H. Silva, and A. Gokirmak, “Temperature-Dependent Characteristics and Electrostatic Threshold Voltage Tuning of Accumulated Body MOSFETs,” IEEE Transactions on Electron Devices, vol. 69, pp. 4138-4143, Aug. 2022. https://doi.org/10.1109/TED.2022.3184906